SuperShafty Sporty/Mini CP41/CS41/CP43/CP44 Weight Hangers

Description

SuperShafty Sporty/Mini CP41/CS41/CP43/CP44 Weight Hangers

These are designed for both Mini and Sporty builds, positioning the tungsten weights lower and further forward than other printed hangers for better weight distribution. All are optimized to work with 1.9 and/or 2.2 Loaded Dice wheels and allow the wheel to be removed without removing the hanger. Each is printed in 2 parts and held together with M3 screws so your weights won’t fall out. Because these sit down in the Loaded Dice wheel, if you plan to run large hubs, we recommend our Spacer Kit as well.

FRONT: 13-Slug Sporty CP41/CP43/CP44

• Each hanger accommodates 13Dux-style tungsten slugs(not included), adding 6.5oz per sidefor a total of 13ozof additional weight up front and as low as possible.That’s 1 oz more than brass hangers with 8 tungsten slugs!
• These are printed in 2 parts and held together with M3 button head screws so your weights will never fall out.
• Optimized forCP41/CP43/CP44axles andcompatible with2.2 Loaded Dice wheels,without requiring removal of the hanger to take off the wheel.

FRONT: 9-Slug Sporty/Mini CP41/CP43/CP44

• Each hanger accommodates 9Dux-style tungsten slugs(not included), adding 4.5oz per sidefor a total of 9ozof additional weight up front and as low as possible. That’s 1 oz more than other printed hangers.
• These are printed in 2 parts and held together with M3 button head screws so your weights will never fall out.
• Optimized forCP41/CP43/CP44axles andcompatible with1.9 and 2.2 Loaded Dice wheels,without requiring removal of the hanger to take off the wheel.

FRONT 6- Slug Dlux Knuckles/Mini/CS41

• Each hanger accommodates 6Dux-style tungsten slugs(not included), adding 3oz per sidefor a total of 6ozof additional weight up front and as low as possible.
• These are printed in 2 parts and held together with M3 button head screws so your weights will never fall out.
• Optimized for Dlux knuckles andcompatible with1.9 Loaded Dice wheels,without requiring removal of the hanger to take off the wheel.

Rear: 5-Slug Sporty/Mini CP41/CP43/CP44

• Each hanger accommodates up to 5Dux-style tungsten slugs(not included), adding 2.5oz per sidefor a total of 5ozof additional weight in the rear and as low as possible.
• These are printed in 2 parts and held together with M3 button head screws so your weights will never fall out.
• Optimized forCP41/CP43/CP44axles and compatible with both1.9 & 2.2 Loaded Dice wheels,without requiring removal of the hanger to take off the wheel.

SPACERS: 1mm, 2mm, 3mm

• Designed to work with the 13-Slug, 9-Slug, and 5-Slug hangers.
• Each pack includes two each of 1mm, 2mm, and 3mm spacers giving you the flexibility of up up to 6mm of offset.

Whats Included

Front: 13-Slug, 9-Slug, and Rear:5-Slug

• (1)Right Hanger
• (1)Left Hanger
• (8)M2.5 x 12mm Hex Head Screws
• (4)M2.5 Washers

Front: 6-Slug

• (1) Right Hanger
• (1) Left Hanger

SPACERS: 1mm, 2mm, 3mm

• (2) 1mm Spacers
• (2) 2mm Spacers
• (2) 3mm Spacers

Installation Tips (13-Slug, 9-Slug, and 5-Slug)

1. Remove the stock hex screws
2. Place the hangers over the stock portal covers.
3. UseM2.5 x 12mm bolts with washerson the top two holes.
4. Use2 bolts without washersfor the bottom holes.
5. Apply a mildthread locker(blue) to prevent screws from backing out.

Note:If you are also running brass portal covers or our spacers, you will need longer M2.5 hex bolts. a multi pack is easily found on Amazon for $10. If you plan to run large hubs, you will need our spacer kit.

Covered against defects in workmanship.