Polymaker PolyMide” CoPA Black (HEX Code – 101820)

Description

These come in 750 gram spools ONLY.PolyMide CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180C.

• Does PolyMide CoPA requires an enclosed printer?

No, all our Nylon features our Warp-Free Technology which means it does not require a heated bed or heated chamber of more than 50C.
PolyMide CoPA can be printed on a 30-40C bed without enclosure.

• Printing, Drying and Annealing Settings?

Printing Temperature: 250C – 270C
Bed Temperature: 25C – 50C
Printing Speed: 30mm/s – 50mm/s
Fan: OFF

Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 50mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s

Drying Settings: 100C for 6h
(Only if the material has absorbed moisture)

Annealing Settings: 80 for 6h

• Do you need to anneal PolyMide CoPA?

PolyMide CoPA displays outstanding mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization after the printing process, an additional step is required: Annealing.
You can anneal PolyMide CoPA by placing your part in the oven at 80C for 6h.

• Spool Dimensions?

1kg cardboard spool:
Spool Inner Hole Diameter:551mm
Spool Diameter: 2001mm
Spool Width: 65.62mm
Spool Weight: 1407g