Description
According to information posted by the CDC – Carbon Nano Tubes (CNT), which this product contains, likely pose a significant health risk, particularly adverse lung effects and inflammation at relatively low-mass doses. Because of this- the use of proper filtration and respirators are required to use this product safely.
PolyMax PETG-ESD offers better mechanical properties than any other regular PETG. Additionally the added carbon nanotubes makes it ESD safe.
ESD: Electrostatic discharge.
Printing, Drying and Annealing Settings?
Printing Temperature: 250C – 290C
Bed Temperature: 70C – 80C
Printing Speed: 30mm/s – 50mm/s
Fan: 20%
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 65C for 6h
(Only if the material has absorbed moisture)
Do I need to use the cooling fan with PolyMax PETG?
If you are looking to produce the strongest part (high layer adhesion), we recommend to switch off your part cooling fan.
If you are looking for a high quality surface finish, we recommend to switch on your part cooling fan.
Usually the best of both worlds is to leave the part cooling fan at 20%.
0.5kg cardboard spool:
Spool Inner Hole Diameter:551mm
Spool Diameter: 2001mm
Spool Width: 65.62mm
Spool Weight: 1907g
Reviews
There are no reviews yet.