GBB15 CAN bus stepper board for 1515 extrusions

Description

A gantry-mounted CAN stepper driver board for 15mm aluminum beams (mostly for PrintersForAnts printers).

This board can be used e.g. for the Micron to have A/B motor controllers directly at the gantry. This reduces the number of wires required to be routed to the gantry.

Additionally, this board can be used for Voron-0 or Tridents as a USB to CAN converter (using the Klipper CAN bridge option) withincludedA/B motor controllers.

PLEASE NOTE: If you are going to use the CAN output to run an umbilical to your CAN toolhead board you need to remove the 120 R surface mount resistor (and add a 120 ohm terminating resistor at the toolhead).

More info can be found here: GBB15