Description
West3D is bringing it’s storied Best Damn Fastener “BDF” kits to support the Hydra! The Hydra is an open source 3 point level system for your print bed.
Note: Picture is not necessarily the same as the latest edition – these are updated to match the current version at time of purchase.
This fastener kit comes with all the fasteners (and extras of each in case a the screw monster eats one) you could need for your Hydrabuild. If you want the best damn fastener (“BDF”) kit on the market, that won’t make that beast of a printer you’re building crywhen its covered in rust, this is the kit you need. We have tested these fasteners against other suppliers, and even other sellers and can tell you definitively this is the best, and most complete kit on the market.
Below are a list of parts included, their quantities and associated material.
| Description | Quantity | Material |
| M3x6 SHCS | 8 | SS304 |
| M3x8 SHCS | 90 | SS304 |
| M3x10 SHCS | 5 | SS304 |
| M4x16 SHCS | 5 | SS304 |
| M5x8 SHCS | 6 | SS304 |
| M5x10 SHCS | 20 | SS304 |
| M3 Roll-In Nut | 30 | SS304 |
| M5 Roll-In Nut | 26 | SS304 |
| M3 Heatset Insert | 45 | Brass |
| M3 Washer | 15 | SS304 |
| M4x8x8L Spacer | 5 | SS304 |
| 10mm M4 Kossel Ball | 5 | SS304 |
Please see: https://docs.zerog.one to obtain the latest information on the Hydra!
Reviews
There are no reviews yet.