Bambu Lab AMS 2 Pro – Automatic Material System

Description

Product Features

• Active Air Vent 65C Filament Drying
• Air-tight Filament Storage
• Up to 24-color/Multi-material Printing
• Brushless Servo Feeding Motor
• RFID filament sync
• Important noticeThe AMS requires specific accessory configurations for various Bambu Lab 3D printers. Please see therequired accessoriesfrom the section below.See theMultiple AMS Units Connection Guidefor detailed setup instructions.
  To connect AMS 2 Pro unit(s) to A1 series printer, anA1 series AMS Hub (SA013)is required.A1 series printer can connect up to 4 AMS units(including AMS HT, AMS, AMS 2 Pro).Note: AMS lite cannot be used in combination with other AMS units.To connect a single AMS 2 Pro unit to X1/P1 series printer, aFilament Buffer(SA003), aPTFE Tube Coupler(FAZ006), and a4-pin Cable(CAB002-N)are required.X1/P1 series printer can connect up to 4 AMS units(including AMS HT, AMS, AMS 2 Pro).
  To connect one or two AMS 2 Pro unit(s) to P2S, aP2S Filament Buffer (SA011)is required.P2S printer can connect up to 4 AMS units (including AMS, AMS 2 Pro) and 4 AMS HT units.
  To connect a single AMS 2 Pro unit to H2S/H2D/H2C, no extra accessory is required.H2 series printer can connect up to 4 AMS units(including AMS, AMS 2 Pro) and 8 AMS HT units.For drying function:A1/X1/P1 One Switching Adapter is required for each AMS 2 Pro unit.P2S printer can power one AMS 2 Pro unit for drying without the switching adapter.H2S printer can power one AMS 2 Pro unit for drying without the switching adapter.